DIY Single Axle Trailer Kit 750Kg Rated 45mm Slipper Springs. 39mm Stub Axles

DIY Single Axle Trailer Kit 750Kg Rated 45mm Slipper Springs. 39mm Stub Axles

2X 39Mm X 200Mm Stub Axles, Washers And Split Pins

• 2X 4 LEAF 45MM BLACK SLIPPER SPRINGS WITH NYLON BUSHES. RATED 900KG PER PAIR (SPRINGS ARE SHOT PEENED FOR EXTRA STRENGTH)

2X Fish Plates

• 4X 39MM ROUND U BOLTS WITH SPRING WASHERS AND NUTS (
• 5
• 0X130 1/2" UBOLTS AVAILABLE ON REQUEST )

2X Axle Pads

• 2X
• 5 STUD HUBS WITH CUPS ALREADY PRESSED IN. HUBS MADE FROM SG CAST WHICH IS MUCH STRONGER THEN GREY IRON
• 2X LM HOLDEN BEARING SETS (
• 2X LM INNER
• BEARINGS,
• 2X LM OUTER
• BEARINGS,
• 2X WASHERS,
• 2X SPLIT PINS,
• 2X DUST SEALS,
• 2X DUST CAPS)

Upgrade To Japanese Bearings $50.0 (Click On Link Below)

• Japanese manufactured bearing upgrade available

Shot Peening

• Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites. It entails impacting a surface with shot with force sufficient to create plastic deformation.
• Shot peening is often called for in aircraft repairs to relieve tensile stresses built up in the grinding process and replace them with beneficial compressive stresses.

Specifications

Source: Huntsman Products

SKU: 191886059237-6